9M2PJU WebTimeSignal v2.0

Browser-based LF Radio Time Signal Transmitter & Clock Synchronizer

00:00:00.0
Loading time...
Synchronizing with atomic time servers...

Time Signal Standard

Audio & RF Optimizations

100%
Inverts Right audio channel 180° to double magnetic flux induction across earphone coils.
Enhances steep square wave transitions for stronger 3rd/5th harmonic RF radiation.

60-Second Real-Time Frame Inspector Offset: 0 ms | RTT: -- | Jitter: ±0.0 ms | Atomic Node: EDGE

Marker / Position Pulse
Binary 1 (0.5s / 0.2s)
Binary 0 (0.8s / 0.1s)
Second: --
Symbol: --
Field: --

⚠️ Safety Warning & Hearing Protection

DO NOT PUT EARPHONES IN OR NEAR YOUR EARS. This software emits high-amplitude high-frequency square waves (12–20 kHz) at 100% volume. Place earphones directly on or around the clock body only.

How to Use
  1. 1. Connect standard wired earphones into the headphone jack or USB-C/Lightning audio adapter.
  2. 2. Wrap the earphone cable 2 to 4 times around your radio-controlled clock near its internal antenna.
  3. 3. Set your device volume to 100% (Maximum).
  4. 4. Click 'Start Transmission' and trigger manual reception (REC/WAVE) on your watch/clock.
  5. 5. Wait 2 to 5 minutes for the timepiece to receive and validate 2–3 full frames, then click 'Stop'.
Operating Theory

Consumer audio sound cards cannot output 40–77.5 kHz directly due to the 20 kHz DAC ceiling. This tool generates high-amplitude square waves whose strong 3rd or 5th odd harmonics (e.g. 13.333 kHz × 3 = 40.0 kHz, 15.5 kHz × 5 = 77.5 kHz) radiate electromagnetic signals picked up by the timepiece's internal ferrite coil.

Supported Clocks & Watch Models